Scan Service Settings
273
Tools
5
Reduce/Enlarge - Buttons 2 to 5
This item can be set when [Reduce/Enlarge] is selected for one of the features that appear
in the second to the fourth column in [1st Tab - Features Allocation].
Select the magnification ratio displayed in [Reduce/Enlarge] from the Reduce/Enlarge
Presets registered.
z
For information on Reduce/Enlarge Preset buttons, refer to "Reduce/Enlarge Presets" (P.277).
Scan Defaults
You can set the default settings of the Scan services. When the machine is turned on, or the
machine exits the Power Saver mode, or when the <Clear All> button is pressed, the
machine resets to the default values set here. Setting frequently used features and values
as the defaults can avoid extra operations required during the use of the machine.
The values set here become valid after the machine turned off and then on.
z
For more information on each setting item, refer to "Scan" in the User Guide.
Color Scanning
Set the default value for [Color Scanning] in the First Tab.
Original Type
Set the default value for [Original Type] in the First Tab.
File Format
Set the default value for [File Format] in the First Tab.
Optimize PDF For Quick Web View
Set the default value for [Optimize For Quick Web View] of [File Format] in the First Tab.
Thumbnail - Outgoing E-mail
For the E-mail feature, set the default value for [Add Thumbnail] when [DocuWorks] or
[XPS] is selected for [File Format] in the First Tab.
z
XPS stands for XML Paper Specification.
Thumbnail - Scan to PC
For the Scan to PC feature, set the default value for [Add Thumbnail] when [DocuWorks] or
[XPS] in selected for [File Format] in the First Tab.
z
XPS stands for XML Paper Specification.
Preview
Set whether or not to place a check mark in the [Preview] checkbox of the First Tab by
default.
Lighten/Darken
Set the default value for [Lighten/Darken] of [Image Options] in the [Advanced Settings]
screen.
To Next Page
Loading...
Need help?
General
