Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Fold Position Adjustment
765
Appendix
16
7 Select [Fold Position Type Setup], and then select [Change Settings].
8 Select a type, and select [Change Settings].
9 Select [Name], and select [Change Settings].
10 Enter the type name, and then select [Save].
Note
z
We recommend you to use a name such as "Single Fold Plain" that allows you to know what the content is.
11 Select the fold type, and then select [Change Settings].
Reference
z
For details on making each fold adjustment, refer to the following sections.
z
For single fold, refer to "Single Fold Position Adjustment" (P.765).
z
For booklet, refer to "Booklet Position Adjustment" (P.767).
z
For C fold, refer to "C Fold Position Adjustment" (P.769).
z
For Z fold, refer to "Z Fold Position Adjustment" (P.771).
z
For Z fold half sheet, refer to "Z Fold Half Sheet Position Adjustment" (P.773).
Single Fold Position Adjustment
Adjust the single fold position.

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)