EasyManuals Logo

Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Fuji Xerox ApeosPort-VI C3370
889 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #379 background imageLoading...
Page #379 background image
Installation When Using TCP/IP (LPD/Port 9100)
379
Printer Environment Settings
7
Installation When Using TCP/IP (LPD/Port 9100)
This section describes how to install the machine using TCP/IP.
Step 1 Preparations
The following items are required to use the machine via TCP/IP (LPD/Port9100).
z
TCP/IP network environment
z
Media (Software/Product Manual) (provided with the machine)
Step 2 Configuration on the Machine
The following describes the configuration procedures to use TCP/IP (LPD/Port9100) on the
machine. Enable the LPD Port or the Port9100 port, and then configure TCP/IP settings.
Note
z
You can configure the settings using CentreWare Internet Services or the Media (Software/Product Manual).
Reference
z
For the items that can be configured using CentreWare Internet Services, refer to "CentreWare Internet Services Setting Items"
(P.381). For information on how to configure the setting using the Media (Software/Product Manual), refer to the Media
Information contained in the Media (Software/Product Manual).
1
Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator’s user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator’s passcode,
and select [Enter].
Note
z
The default user ID is "11111".
z
The default passcode is "x-admin".
3) Select [Tools] on the Services Home screen.
2
Enable the LPD port or Port9100 port as appropriate.
In this example, the LPD port is enabled.
1) Select [Connectivity & Network Setup].
2) Select [Port Settings].
3) Select [LPD], and then select [Change Settings].
4) Select [Port Status], and then select [Change Settings].
5) Select [Enabled], and then select [Save].
6) Select [Close] repeatedly until the [Tools] screen is displayed.

Table of Contents

Other manuals for Fuji Xerox ApeosPort-VI C3370

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-VI C3370 and is the answer not in the manual?

Fuji Xerox ApeosPort-VI C3370 Specifications

General IconGeneral
Print Resolution1200 x 2400 dpi
Copy Resolution600 x 600 dpi
Scan Resolution600 x 600 dpi
FunctionsPrint, Copy, Scan, Fax (optional)
Fax Speed33.6 kbps
Print Speed33 ppm (black/color)
ConnectivityEthernet, USB, Wi-Fi
Memory4 GB
Paper Input Capacity1, 140 sheets
Paper Output Capacity250 sheets
Supported Paper SizesA3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex PrintingYes
PDLPCL6, PostScript 3
Copy Speed33 ppm (color/black)

Related product manuals