Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Encryption and Digital Signature Settings
456
Encryption and Digital Signature Settings
13
When a passcode is required, select [Next] and enter the system administrator’s passcode,
and select [Enter].
Note
z
The default user ID is "11111".
z
The default passcode is "x-admin".
3 Select [Tools] on the Services Home screen.
4 Select [Connectivity & Network Setup].
5 Select [Security Settings].
6 Select [IPsec Settings].
7 Configure the required settings.
Reference
z
For details on the settings, refer to "IPsec Settings" (P.261).
8 Select [Close].
Step3 Configuration on the Computer
The following describes the configuration procedures on the computer.
Configure the following settings on the computer.
z
Create an IP security policy
z
Assign the IP security policy
Reference
z
For details on the settings, refer to the help of the computer.

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)