Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Paper and Other Media
70
Paper and Other Media
2
5 While pinching the paper guide, lightly align the edge to the edge of the paper.
6 Push the tray in gently until it stops.
Note
z
Affix the paper size label to the front of the paper tray.
7 Specify the type of loaded paper when you have changed the paper type.
Reference
z
For information on how to set the paper types, refer to "Changing the Paper Settings" (P.73).
Changing the Paper Size for Tray 6 (HCF (A4 1 Tray))
The following describes how to change paper size in Tray 6 (HCF (A4 1 Tray)) (optional).
1 Pull out Tray 6 until it stops.
Important
z
While the machine is processing a job, do not pull out the tray that is being used for the job.
z
Do not add a new stack of paper on top of the remaining paper in the tray to prevent paper jams or any other
troubles. First, remove the remaining paper from the tray, and then load the new stack of paper.
2 Remove any paper loaded in the tray.
3 Open the end guide (1) and unscrew the screw (2). And then remove the guide from the
tray.
CAUTION
z
Make sure to pull out the tray slowly. If the tray is pulled out with
too much force, the tray might possibly hit your knees or other parts
of your body and cause injuries.

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)