Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Appendix
762
Appendix
16
Print Head Alignment
You can correct the density unevenness of scanned data caused by the Print Head.
Note
z
Select [Reset Adjustment Value] to reset the current adjustment value.
1 Load paper in a tray.
Note
z
Load paper of 210 mm x 279.4 mm or larger.
2 Press the <Log In/Out> button, and then enter the System Administration mode.
Reference
z
For how to enter the System Administration mode, refer to "System Settings Procedure" (P.156).
3 Select [Tools] on the Services Home screen.
4 Select [System Settings] > [Common Service Settings] > [Maintenance].
5 Select [Print Head Alignment].
Note
z
Select? ?to return to the previous screen or? ?to move to the next screen.
6 Select [Print Calibration Chart].

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)