Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Paper and Other Media
68
Paper and Other Media
2
2 Remove any paper loaded in the tray.
3 Pinch the paper guide and slide it to the desired paper size.
4 Load and align the edge of the paper against the left edge of the tray, with the side to be
copied or printed on facing down.
Important
z
Do not load paper above the maximum fill line. It may cause paper jams or machine malfunction.
5 While pinching the paper guide, lightly align the edge to the edge of the paper.
6 Push the tray in gently until it stops.
Note
z
Affix the paper size label to the front of the paper tray.
7 Specify the type of loaded paper when you have changed the paper type.
Reference
z
For information on how to set the paper types, refer to "Changing the Paper Settings" (P.73).
Changing the Paper Size for Tray 4 (When Tandem Tray Module is
Installed)
The following describes how to change paper size in Tray 4 when the Tandem Tray Module
is installed.

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)