Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Printable Area
741
Appendix
16
Printable Area
This section describes the area on paper that can be printed.
Standard Printable Area
The area excluding the 4.1 mm margins on all four edges of paper.
Extended Printable Area
You can extend the printable area.
Note that the area may be limited by the machine.
Important
z
The machine cannot print on any area within 4 mm of the upper edge of paper and 2 mm of the lower, right,
and left edges of paper. For printing, the maximum printable area of the machine is 305.0 x 1194.0 mm. The
machine cannot print on any area outside of the maximum printable area.
Note
z
To extend the printable area, change the PCL print driver setting, or the [Print Area] setting on the touch
screen.
Reference
z
For more information on the setting method on the print driver, refer to the help provided for the print driver. For more information
on the setting on the control panel, refer to "Print Area" (P.267).

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)