Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Problem Solving
704
Problem Solving
15
6 Remove the jammed staples (1), and then return the metal part pulled up in step 5 to the
original position (2).
7 Push the staple cartridge into the machine until it clicks into place.
8 Close the finisher front cover.
Note
z
If the finisher front cover is not completely closed, a message will appear and the machine remains paused.
Staple Jams in Staple Cartridge (for C3 Finisher and C3 Finisher with
Booklet Maker)
This section describes how to clear staple jam occurred in the staple cartridge of the C3
Finisher (optional) and the C3 Finisher with Booklet Maker (optional).
1 Make sure that the machine is not operating, and open the finisher front door.
CAUTION
z
Be careful in removing jammed staples.

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)