Before Using the Machine
32
Before Using the Machine
1
Customizing the Control Panel
You can change the services displayed on the touch screen or the features assigned to the
buttons to make best use of the machine.
This section describes how to change the screen default, the services displayed after Auto
Clear, the services displayed on the Services Home screen, and the services assigned to the
custom buttons, and how to adjust the screen brightness.
z
For information on how to change the other settings of the control panel, refer to "Screen/Button Settings"
(P.170).
Changing the Screen Default
You can change the screen displayed when the machine is turned on or the Power Saver
mode is deactivated. The Services Home screen is displayed by factory default.
1
Press the <Log In/Out> button.
2
Enter the system administrator’s user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter]. When a passcode is required, select [Next] and
enter the system administrator’s passcode, and select [Enter].
z
The default user ID is "11111".
z
The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
z
When the Services Home screen is not displayed on the touch screen, press the <Services Home> button.
4
Select [System Settings] > [Common Service Settings] > [Screen/Button Settings].
To Next Page
Loading...
Need help?
General
