Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Maintenance
122
Maintenance
3
5 Select [2 Sided Color Scanning Calibration].
6 Select [Paper Supply] and set the paper tray. Select [Print Chart] and then [Start].
Note
z
Selecting [Restore Previous Values] and then [Start] restores the previous settings. To restore factory default
settings, select [Restore Factory Default Values] and then [Start]. In both cases, a message is displayed on the
touch screen when the restoration is completed.
z
The message "Outputting the chart for 2 Sided Color Scanning Calibration...." appears and the machine prints
a chart for 2 Sided Color Scanning Calibration.
7 Align the magenta patch (squares printed at the top and bottom of the Chart for 2 Sided
Color Scanning Calibration) of the printed Chart for 2 Sided Color Scanning Calibration
against the left side of the document feeder, and load the chart facing up on the duplex
automatic document feeder.
8 Select [Start].
The message “Scanning chart...” appears and the machine prints a chart for 2 Sided Color
Scanning Calibration.
9 Align the magenta patch (squares printed at the top and bottom of the Chart for 2 Sided
Color Scanning Calibration) of the printed Chart for 2 Sided Color Scanning Calibration
against the left side of the document feeder, and load the chart facing down on the duplex
automatic document feeder.
Magenta
Magenta

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)