Fax Service Settings
283
Tools
5
Stamp
Set the default value for [Stamp] in the [Layout Adjustment] screen.
z
This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.
Skip Blank Pages
Set the default value for [2 Sided Scanning] in the [Fax/Internet Fax] and [Layout
Adjustment] screens to [2 Sided (First Page 1 Sided)].
z
This feature is for service representative use. For more information, contact our Customer Support Center.
Starting Rate
Set the default value for [Starting Rate] in the [Fax/Internet Fax Options] screen.
Delay Start - Specific Time
Set the default value for [Specific Time] of [Priority Send/Delay Start] in the [Fax/Internet
Fax Options] screen when [Specific Time] is selected for [Delay Start].
Transmission Header Text
Set the default value for [Transmission Header Text] in the [Fax/Internet Fax Options]
screen.
Confirmation Options
Set the default value for [Confirmation Options] of [Acknowledgement Report] in the [Fax/
Internet Fax Options] screen.
z
You can select Delivery Receipts or Read Receipts in [Delivery Confirmation Method]. For more information
on the delivery confirmation method, refer to "Delivery Confirmation Method" (P.295).
Delivery Receipts/Read Receipts
Set the default value for [Read Receipts] or [Delivery Receipt] of [Acknowledgement
Report] in the [Fax/Internet Fax Options] screen.
z
You can select Delivery Receipts or Read Receipts in [Delivery Confirmation Method]. For more information
on the delivery confirmation method, refer to "Delivery Confirmation Method" (P.295).
Internet Fax Profile
Set the default value for [Internet Fax Profile] in the [Fax/Internet Fax Options] screen.
Internet Fax Subject
Set the default value for [Internet Fax Subject] in the [Fax/Internet Fax Options] screen. Up
to 128 single-byte characters can be entered for the subject.
Internet Fax Encryption
Set the default value for [Encryption] in the [Fax/Internet Fax Options] screen.
z
This feature appears only when the root certificate for a remote server for remote authentication (except
when ApeosWare Management Suite is used) is set.
To Next Page
Loading...
Need help?
General
