Tools
358
Tools
5
îš„ Kerberos Server Certificate Verification
Set whether or not to verify the Kerberos server certificate when a user uses the Kerberos
server as a remote authentication server.
z
This item is displayed when the Extensible Customization Function is set to be enabled.
îš„ Smart Card Logout Timing
Select the logout method for smart card authentication when a contactless smart card is
used for authentication.
When [Log Out when Card is Removed] is selected, you can logout from the machine by
removing the smart card from the smart card reader. When [Log Out from Control Panel] is
selected, you can logout by operating the touch screen or control panel.
îš„ Save remote accounts in this machine
Select whether or not to save the user information used for remote authentication. While
the user information is saved in the machine, the machine can authenticate the user using
the information saved in the machine even when the remote server is off.
z
This setting applies only to a user who is authenticated by smart cards.
îš„ Delete Remote Accounts
Select whether or not to delete the user information saved in the machine for remote
authentication. Select from [Do Not Delete], [Weekly], and [Monthly].
For [Weekly], you can set the day and time. For [Monthly], set the date and time.
z
This setting applies only to a user who is authenticated by smart cards.
Maximum Login Attempts by System Administrator
This feature protects the settings from being changed by someone impersonating your
system administrator. If authentication for a system administrator's ID fails more than
specified times continuously, access is denied.
You can specify a login attempt count from 1 to 10.
z
The failure count is reset when the machine is restarted.
z
To cancel the access rejection state, restart the machine by switching off and on the power.
Passcode Policy
îš„ Passcode Entry for Control Panel Login
You can set whether a passcode is required when the system administrator or a user uses
the machine. Selecting [On] enables [System Administrator's Passcode] setting and
[Passcode] setting for [Create/View User Accounts].
Selecting [Off] does not require the passcode, even if a passcode is set in the above
settings.
z
The setting of [Passcode Entry for Control Panel Login] is used for authentication on the machine. A passcode
must always be entered when accessing from remote devices using CentreWare Internet Services or the like,
To Next Page
Loading...
Need help?
General
