Problem Solving
512
Problem Solving
15
Unable to copy
with the specified
size.
The document is misaligned. Load the document correctly.
z
Refer to "Copy" > "Copying Procedure" in the User
Guide.
The document guides on the
document feeder are not set
in the correct positions.
Load the document correctly, and align the
document guides to the document.
z
Refer to "Copy" > "Copying Procedure" in the User
Guide.
The document is a
nonstandard size.
Specify the document size, and then copy.
z
Refer to "Copy" > "Copying Procedure" in the User
Guide.
The document is folded. Flatten the curl and load the document again.
z
Refer to "Copy" > "Copying Procedure" in the User
Guide.
Unable to copy in
color.
[Output Color] is set to [Black
& White].
Set [Output Color] to [Auto Detect] or [Color].
z
Refer to "Copy" > "Copy" > "Output Color (Selecting the
Color for Copying)" in the User Guide.
The document
edges are missing
on the copy.
The document is larger than
the printable area.
Adjust [Reduce/Enlarge] to copy the
document smaller.
Outputs are not
stapled.
The Finisher is not attached. The Finisher is required to staple. Install the
Finisher, or change the print option settings
to cancel stapling.
The number of pages to be
stapled exceeds the
maximum number for
stapling.
Reduce papers to be less than the maximum
number for stapling. The maximum number
of pages for stapling varies depending on the
used finisher.
z
For more information, refer to "Finisher A2 (Optional)*"
(P.733), "Finisher B1 (Optional)*" (P.734), "C3 Finisher
(optional)" (P.736), or "C3 Finisher with Booklet Maker
(optional)" (P.738).
Symptom Cause Remedy
To Next Page
Loading...
Need help?
General
