Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Error Code
605
Problem Solving
15
021-501
[Cause] The communication with the EP system via the internet failed.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
021-502
[Cause] An error occurred while connecting to the EP system via the
Internet. There is a problem with the address of the EP proxy
server name.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. Execute the
operation again. If the error still is not resolved, contact our
Customer Support Center.
021-503
[Cause] An error occurred while connecting to the EP system via the
Internet. There is a problem with the address of the EP proxy
server name.
[Remedy] Check the followings:
z
LAN cable connection
z
DNS server address setting
z
The default gateway setting
z
The subnet mask setting
If the error still is not resolved after checking the above settings,
there may be a network failure or the proxy server settings may
be changed or failed. Consult your system administrator.
If the network works normally but the error still is not resolved,
contact our Customer Support Center.
021-504
[Cause] An error occurred while connecting to the EP system via the
Internet.
[Remedy] Check the followings:
z
LAN cable connection
z
DNS server address setting
z
The default gateway setting
z
The subnet mask setting
If the error still is not resolved after checking the above settings,
there may be a network failure or the proxy server settings may
be changed or failed. Consult your system administrator.
If the network works normally but the error still is not resolved,
contact our Customer Support Center.
021-505
[Cause] The SSL/TLS communication with the EP server failed.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
021-506
[Cause] The SSL Certificate for the EP server is incorrect.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. Execute the
operation again. If the error still is not resolved, contact our
Customer Support Center.
Error Code
Cause and Remedy

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)