Error Code
641
Problem Solving
15
"041-001" - "044-999"
033-742
[Cause] An error occurred during fax transmission. This error may occur
if the remaining capacity of the machine's memory is 10% or
less and Manual Send is used.
[Remedy] If this error was caused when using Manual Send, connect the
line after storing the document, and then send. If the error still
is not resolved, delete unnecessary data from the hard disk to
free up disk space, and execute the operation again.
If the error persists, contact our Customer Support Center.
033-743
033-744
033-745
033-746
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. Try again. If
the error still is not resolved, contact our Customer Support
Center.
033-747
[Cause] The job is temporarily suspended.
[Remedy] No measure is required.
033-748
033-749
[Cause] The machine will automatically recover and print the document.
[Remedy] No measure is required.
033-750
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. Try again. If
the error still is not resolved, contact our Customer Support
Center.
033-751
[Cause] An activity report output occurred during the printer lockout
duration. Outputting the activity report was suspended because
the machine was in the Sleep mode.
[Remedy] No measure is required because the machine will output the
report after exiting the Sleep mode.
Error Code
Cause and Remedy
041-310
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
041-316
041-317
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
041-333
041-334
041-335
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
Error Code
Cause and Remedy