Error Code
663
Problem Solving
15
"127-001" - "132-999"
125-311
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
Error Code
Cause and Remedy
127-310
127-311
127-312
127-313
127-314
127-315
127-320
127-337
127-342
127-353
127-354
127-396
127-398
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If same
message is displayed again, contact our Customer Support
Center.
127-399
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, switch off the machine power
again, and then switch on the machine power while pressing the
<Start> button and <Stop> button simultaneously, and hold this
condition for 6 seconds. The print data that caused an error will
be deleted automatically, and the machine reboots. If the error
still is not resolved, contact our Customer Support Center.
127-700
[Cause] The SIP registrar server cannot be used.
[Remedy] Check if the SIP registrar server is available. Also, confirm that
[SIP Registrar Server Setup] is set correctly under [Tools] >
[System Settings] > [Connectivity & Network Setup] > [SIP
Settings] > [SIP Registrar Server Setup].
Error Code
Cause and Remedy
To Next Page
Loading...
Need help?
General
