Problem Solving
708
Problem Solving
15
5
Remove the jammed staples (1), and return the metal part pushed down in step 4 to its
original position (2).
6
Return the booklet staple cartridge to its original position.
7
Slightly push the booklet staple cartridge upwards, and make sure that it clicks into place.
z
Return the booklet staple cartridge until ( ) of the booklet staple cartridge is fitted in ( ) of the booklet
unit.
8
Return the booklet unit to its original position.
Be careful in removing jammed staples.
To Next Page
Loading...
