Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Appendix
758
Appendix
16
1) Load the CMYK chart on the document glass. Place the chart with the print side facing
down and the edge of a black mark aligning to the upper side of the document glass.
2) Place five or more blank sheets with the same size as for the chart on the CMYK chart.
3) Close the document cover and select [Start].
4) After scanning has been completed, remove the chart and blank sheets.
5) Scan the RGB chart in the same steps as the CMYK chart.
12 Select [Start].
13 Select [Confirm].
14 Print the charts again and confirm that the density uniformity is adjusted.
15 Select [Save] until the Services Home screen is displayed.

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)