Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Adjust Image Transfer
779
Appendix
16
Adjusting the transfer output value by scanning the sample printout
1 Press the <Log In/Out> button and enter the System Administration mode.
Reference
z
For how to enter the System Administration mode, refer to "System Settings Procedure" (P.156).
2 Select [Tools] on the Services Home screen.
3 Select [System Settings] > [Common Service Settings] > [Maintenance].
4 Select [Adjust Image Transfer].
5 Select [Paper Type].
6 Select the paper type, and then select [Close].

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)