Appendix
802
Appendix
16
Collate 404 Selects whether to print multiple-sheet documents as collated sets (1, 2, 3...1,
2, 3...).
[0] (Default): Off
[1]: On
Layout 405 Sets the layout for printing.
z
This item can be set when [PDF Bridge] is selected for [Process Mode].
[0] (Default) : Auto %
[1]: Booklet
[2]: 2-up
[3]: 4-up
[4]: 100% (size-by-size)
The [Auto %] setting automatically calculates the largest magnification
possible to fit to the output paper size.
The [Booklet] setting prints the images side by side, on both sides of each
page, in the correct order to make a booklet based on the layout of the
original PDF file. Some documents may not be printed in a booklet fashion
depending on the structure of their pages. In this case, they will be printed
with the [Auto %] setting.
z
When [A4] is selected for [Paper Size], documents will be printed on A4 size paper.
z
When [Paper Size] is set to [Auto], documents will be printed on A3 or A4 size paper.
The [2-up] setting prints two pages onto one sheet of paper. When [2-Up] is
selected, the paper size is fixed at A4.
The [4-up] setting prints four pages on each sheet of paper. When [4-Up] is
selected, the paper size is fixed at A4.
Paper size 406 Sets the size of the paper to be printed.
[0] (Default) : Auto
[1]: A4
The [Auto] setting automatically determines the paper size, based on the size
and settings of a PDF file to be printed.
Output color 407 Sets whether to print in color or monochrome.
[0] (Default) : Auto
[1]: Black
The [Auto] setting automatically determines the output color: color or
monochrome for each page. If colors other than black and white are used on
the original, the machine prints the document in color, and if only black and
white are used on the original, the machine prints in monochrome.
Process mode 408 Sets the print processing mode when you use the PDF Direct Print feature.
[0] (Default): PDF Bridge
[1]: PS
[PDF Bridge] processes PDF files using the PDF Direct Print feature provided
by Fuji Xerox.
[PS] processes PDF files using the PostScript feature provided by Adobe.
z
This item is displayed when the Adobe PostScript 3 Kit (optional) is installed.
z
The print results may differ between the [PDF Bridge] and [PS] selections.
z
When [PS] is selected, the [Layout] setting becomes invalid.
Setting Item Item
Number
Value
To Next Page
Loading...
Need help?
General
