Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Appendix
870
Appendix
16
4 When the call is finished, place the receiver back in the cradle.
Important
z
Be sure that the receiver is placed properly in the cradle. Otherwise, the line remains "busy".
5 Select [Close].
On-hook Dialing
The following describes how to place a call with on-hook dialing. Adjust the line monitor
volume so that you can hear the sound clearly.
Reference
z
The volume of the line monitor can be changed in the System Administration mode. For more information on how to change the
volume, refer to "Line Monitor Volume" (P.170). By factory default, the volume is set to [Soft].
1 On the Services Home screen, select [Fax/ Internet Fax].
2 Select the [More Options] tab, and then select [On-hook (Manual Send/Receive)].
3 Specify the call destination.
z
The call destination can be specified using the numeric keypad, address numbers, or one-
touch buttons. The Address Book cannot be used.

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)