Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Replacing Consumables
91
Maintenance
3
3 After you take out the staple cartridge, check inside of the finisher for any remaining
staples. Remove any staples remaining inside.
4 Pinch both sides of the empty staple case with your fingers (1), and remove the staple case
from the cartridge (2).
5 Insert the front side of the new staple case into the staple cartridge (1), and then push the
rear side into the cartridge (2).
6 Push the staple cartridge into the finisher until it clicks into place.
7 Close the finisher front cover.
Note
z
If the front cover is not closed completely, a message appears and the machine will remain paused.

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)