Fuji Xerox DocuCentre-III 2007 User Manual

14 Problem Solving
340
Problem Solving
14
012-211
012-212
012-213
012-221
012-223
012-224
012-231
012-241
012-242
012-243
012-244
O [Cause] Finisher malfunction
[Remedy] Turn the machine off and on. If the error persists, contact
our Customer Support Center.
012-247
012-249
012-252
012-253
O [Cause] Finisher malfunction
[Remedy] Turn the machine off and on. If the error persists, contact
our Customer Support Center.
012-254
O [Cause] The sensor was activated because paper output to the
finisher was removed before the finisher tray lowered and
completely stopped in position. Or, there is a foreign object
under the finisher tray.
[Remedy] If there is any foreign object under the finisher tray, remove it
and then turn the machine off and on. If the error persists,
contact our Customer Support Center.
012-255
012-256
012-257
012-258
012-259
012-260
012-262
012-263
012-267
012-268
012-269
012-280
012-281
012-282
012-283
012-284
012-286
012-287
012-291
012-295
012-296
O [Cause] Finisher malfunction
[Remedy] Turn the machine off and on. If the error persists, contact
our Customer Support Center.
Error Code
Category
Cause and Remedy
CPFSMO
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.

Fuji Xerox DocuCentre-III 2007 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-III 2007
Category	All in One Printer
Language	English