6 Scan
102
Scan
6
Scanning Procedure
The basic flow of scan operations including placing the document in the machine and
setting advance settings is detailed below.
Important • The machine supports the scan feature using the USB connection. Scanning using a
network is not supported.
• The monochrome binary scan only.
Placing the Document
The following two methods are available to load documents.
Document feeder
z
Single sheet
z
Multiple sheets
Document glass
z
Single sheet
z
Bound documents, such as book
Note • The document feeder is not available for some models. An optional component is required.
Contact your local Fuji Xerox representative.
Document Feeder
Supported document sizes
You can place documents of the standard sizes in the document feeder.
When a document is placed in the document feeder, the machine detects the document
size automatically. The following standard size documents are detected automatically:
A5 , A4 , A4 , A3 , B5 , B5 , B4 , 8.5 × 11" , 8.5 × 11" , 8.5 × 13" , 8.5
× 14" , 11 × 17" , 16K , 16K , and 8K .
Note • You can select one of the following alternative document sizes. For more information, refer
to "System Settings" (P.116).
• 8.5 × 13" or 8.5 × 13.4"
• 8.5 × 13" or 8.5 × 14"
• B5 or 16K
Selectable document sizes in the scan driver
A3 (297 × 420 mm), A4 (210 × 297 mm), A5 (148 × 210 mm), B4 (257 × 364 mm), B5
(182 × 257 mm), 8.5 × 11", 8.5 × 14", 11 × 17", 7.25 × 10.5", and Custom.
Supported documents types (weights)
Documents with weights from 38 to 128 gsm (50 to 128 gsm for 2 Sided documents)
can be placed in the document feeder and scanned.
To Next Page
Loading...
Need help?
General
