5 Copy
84
Copy
5
Copying Procedure
This section describes the basic copy procedures.
Placing the Document
The following two methods are available to load documents:
Document feeder
z
Single sheet
z
Multiple sheets
Document glass
z
Shingle sheet
z
Bound documents, such as book
Note • The document feeder is not available for some models. An optional component is required.
Contact your local Fuji Xerox representative.
Document Feeder
Supported document sizes
You can place documents of the standard sizes in the document feeder.
When a document is placed in the document feeder, the machine detects the document
size automatically. The following standard size documents are detected automatically:
A5 , A4 , A4 , A3 , B5 , B5 , B4 , 8.5 × 11" , 8.5 × 11" , 8.5 × 13" , 8.5
× 14" , 11 × 17" , 16K , 16K , and 8K .
Note • You can select one of the following alternative document sizes. For more information, refer
to "System Settings" (P.116)".
• 8.5 × 13" or 8.5 × 13.4"
• 8.5 × 13" or 8.5 × 14"
• B5 or 16K
Supported documents types (weights)
Documents with weights from 38 to 128 gsm (50 to 128 gsm for 2 Sided documents)
can be placed in the document feeder and scanned.
The document feeder accepts the following number of sheets.
Important • To avoid paper jams, use the document glass for mixed size, folded, wrinkled, cut-and-
pasted documents, curled paper, or carbon-backed paper. If you can flatten the curled
document, you can use the document.
Document Type (gsm) Number of Sheets
Lightweight (38 to 49 gsm) 110 sheets
Plain (50 to 80 gsm) 110 sheets
Heavyweight (81 to 128 gsm)
(Bypass tray only)
75 sheets
To Next Page
Loading...
Need help?
General
