8 Tools
122
Tools
8
Network Settings
Note • These settings are available when the Simple Network Print Kit is installed.
Program
Numbers
Menu Items Descriptions
Values
(*: Default setting)
1006 Ethernet Speed Set the communication
speed.
17: 10BASE-T Half
18: 100BASE-TX Half
33: 10BASE-T Full
34: 100BASE-TX Full
127: Auto*
1007 IP Mode Set the type of TCP/IP. 4: IPv4*
6: IPv6
10: Both IPv4 and IPv6
1008 Get IP Address Set the retrieve method for
the IP address, subnet mask
and gateway address.
1: RARP
2: DHCP
4: BOOTP
8: DHCP with AutoIP*
16: Set manually
1009 Manual IP
Address 1 on
IPv4
Set the 1st 8-bit of the
machine's IP address using
the IPv4.
0* - 255
1010 Manual IP
Address 2 on
IPv4
Set the 2nd 8-bit of the
machine's IP address using
the IPv4.
0* - 255
1011 Manual IP
Address 3 on
IPv4
Set the 3rd 8-bit of the
machine's IP address using
the IPv4.
0* - 255
1012 Manual IP
Address 4 on
IPv4
Set the 4th 8-bit of the
machine's IP address using
the IPv4.
0* - 255
1013 Manual Subnet
Mask 1 on IPv4
Set the 1st 8-bit of the
machine's subnet mask using
the IPv4.
0* - 255
1014 Manual Subnet
Mask 2 on IPv4
Set the 2nd 8-bit of the
machine's subnet mask using
the IPv4.
0* - 255
1015 Manual Subnet
Mask 3 on IPv4
Set the 3rd 8-bit of the
machine's subnet mask using
the IPv4.
0* - 255
1016 Manual Subnet
Mask 4 on IPv4
Set the 4th 8-bit of the
machine's subnet mask using
the IPv4.
0* - 255
1017 Manual
Gateway
Address1 on
IPv4
Set the 1st 8-bit of the
machine's gateway address
using the IPv4.
0* - 255
1018 Manual
Gateway
Address2 on
IPv4
Set the 2nd 8-bit of the
machine's gateway address
using the IPv4.
0* - 255
To Next Page
Loading...
Need help?
General
