Fuji Xerox DocuCentre S2010 User Manual

5 Copy
94
Copy
5
Lighten/Darken
You can set the density from five levels. The farther left the position of , the darker
the copy; the farther right, the lighter.
You can also set the toner saver mode.
1 Press the <Lighten/Darken> button to select a
copy density level.
Dark +2
Creates copies with the darkest density. Use
this setting to scan documents containing light
objects.
Dark +1
Creates copies with a fairly dark density. Use
this setting to scan documents containing fairly light objects.
Normal
Creates copies with the same density as the document.
Light +1
Creates copies with a fairly light density. Use this setting to scan documents containing
fairly dark objects.
Light +2
Creates copies with the lightest density. Use this setting to scan documents containing
dark objects.
Toner saver
Creates copies using less amount of toner with the following settings.
z
Lighten/Darken: Light +2
z
Sharpness: Sharp +2
z
Original type: Photo&Text (Should not be changed)
ID Card Copy
You can copy both sides of an ID card (name card, employee card, etc.) on one side
of paper.
Press the <ID Card Copy> button to enable this feature.
<Lighten/Darken> button
Original document
Front side
Back side
Original orientation
Copied output
Front side
Back side

Fuji Xerox DocuCentre S2010 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre S2010
Category	Printer
Language	English