Installing the Print Driver/Scan Driver
45
Environment Settings
2
Installing the Print Driver/Scan Driver
Installing the Print Driver
To enable the machine to print, you must first install a print driver from the Driver CD
Kit CD-ROM.
The CD-ROM contains the following print driver.
To install the print driver, follow the instructions provided in the CD-ROM
Documentation (HTML) included on the CD-ROM.
Installing the Scan Driver
A direct USB connection to a computer lets you load scanned data from the machine
directly to the computer.
The Driver CD Kit CD-ROM comes with the TWAIN-compatible and WIA-compatible
scan driver.
To install the scan driver, follow the instructions provided in the CD-ROM
Documentation (HTML) included on the CD-ROM.
Be sure to restart the computer immediately after installing the scan driver.
Note • This feature is not available on a network environment.
Print Driver Name Description
FX DocuCentre XXXXX Click [Print Driver] in the [Main] menu of the Driver CD Kit to
start the installation.
The standard print driver. Converts the data created by the
application software to images before sending them to the
printer.
XXXXX: Displayed as either "S2010" or "S1810," depending on the model of your machine.
Application Description
TWAIN-compatible and WIA-
compatible scan driver
Click [Scan Driver] in the [Main] menu on the Driver CD Kit
to start the installation.
This feature can be used to load scan data from a TWAIN-
compatible or WIA-compatible application installed on a
computer.
Note • The supported applications are 32-bit only.
For more information, refer to "Loading Scan Data Using a PC-
Based Application" (P.106).
To Next Page
Loading...
Need help?
General
