To Next Page

To Previous Page

11 Problem Solving

182

Problem Solving

E-3: Paper Jams in Tray 1

Follow the steps below to clear paper jams in Tray 1.

1 Remove the jammed paper by referring to "E-1: Paper Jam in Left Cover [A]" (P.180).

2 If the jammed paper cannot be removed, pull

out the tray.

Important • Pulling out a tray after a paper jam without

checking where the jam is located may

cause the paper to tear and leave shreds

inside the machine. To prevent equipment

failure, check the location of paper jams on

the display before attempting to clear them.

3 Remove the jammed paper.

If the tray is empty, load paper.

Note • If the paper tears, check to make sure there

are no remaining shreds in the machine.

4 Push the tray in gently until it stops.

E-4: Paper Jams in Tray 2

Follow the steps below to clear paper jams in Tray 2.

1 Remove the jammed paper by referring to "E-2: Paper Jam in One Tray Module Cover

[B]" (P.181).