4 Loading Paper
74
Loading Paper
4
Unusable Paper
Using paper not recommended by Fuji Xerox may cause a paper jam or machine
malfunction. Use paper recommended by Fuji Xerox.
z
Damp or wet paper
z
Paper pre-printed with other printer or copying machine
z
Wrinkled, creased, or ripped paper
z
Envelopes that are not flat, or that have clasps
z
Color paper with surface treatments
z
Paper with rough surface, such as pulp paper or fibrous paper
z
Punched paper
z
Transparency film
Storing and Handling Paper
Please keep the following points in mind when storing paper
z
Store paper inside a cabinet or other dry place. Paper that has absorbed moisture
can result in paper jams and lower image quality.
z
After opening a package of paper, wrap and store any remaining paper. We
recommend that you store remaining paper in moisture prevention packets.
z
Store paper on a flat surface to prevent bends or warping.
Please adhere to the following points when loading paper in a tray
z
Align the stack of paper neatly before loading it in a tray.
z
Do not use creased or wrinkled paper.
z
Do not use warped or curled paper.
z
Do not load paper of mixed sizes together into a tray.
z
Take care not to touch the print side. Oils from your skin could adhere to the print
media, which could affect printing quality. If unavoidable, be sure to use a finger cot,
gloves, or other means to cover your fingers before touching the print media.
z
LEF is recommended for heavyweight media feeds from the Bypass tray. If a misfeed
occurs, please apply an intentional upper curl to the leading edge of the paper.
To Next Page
Loading...
Need help?
General
