5 Copy
98
Copy
5
Note • The value set for erase frame applies to all four edges of the document.
• For ID card copy, the erase frame is set separately.
You can set the erase frame in the System Administration mode. For more information,
refer to "Feature Settings" (P.126).
Auto Rotation
You can set to rotate the scanned data when copying the document with an orientation
that differs from the orientation of the paper loaded in tray to fit onto the paper.
You can set this feature in the following cases:
- The tray selection is set to automatic.
- The zoom ratio is set to automatic.
- The zoom ratio is set to "100%" and both document and paper are the same size.
Make sure to set the size and orientation of document when using the document glass.
To Next Page
Loading...
Need help?
General
