5 Copy
90
Copy
5
Advanced Copy Settings
This section describes all the settings you can set for the copy feature.
* For the features with "*", you can change the settings in the System Administration
mode.
Note • You can change the default value of some setting items.
For more information on changing the settings, and how to change them, refer to "Feature
Settings" (P.126).
Paper Supply
You can set the tray for copying.
1 Press the <Paper Supply> button to select a
tray.
In the status machine diagram, the tray
indicator lights up on the selected tray, and its
paper size and orientation are displayed on the
paper size display.
Aut (Automatic paper selection)
Automatically determines the tray holding the appropriate paper, based on the
document size and the specified zoom ratio.
Note • When using the automatic paper selection, you cannot set the automatic zoom ratio.
Setting Item Description
See
Page:
Paper Supply
Sets the tray to use. P.90
Collate
Sets the output method to use when making
multiple sets of copies.
P.91
Reduce/Enlarge
Sets a reduction or enlargement factor. P.91
Original Size
Sets the document size. P.92
Original Type
Sets the document type. P.93
Lighten/Darken
Adjusts the copy density. P.94
ID Card Copy
Used to copy ID cards. P.94
2 Sided
Used to select 1 Sided or 2 Sided copying. P.96
Pages per Side
Used to copy multiple documents on a single
page.
P.96
Sharpness*
Adjusts the sharpness. P.97
Background Suppression*
Removes the document's background
suppression.
P.97
Erase Frame*
Adjusts the level of erase frame. P.97
Auto Rotation
Rotates the scanned data when copying. P.98
To Next Page
Loading...
Need help?
General
