10 Maintenance
140
Maintenance
10
*1 The remaining page yield for copy/print jobs is applicable when A4 paper LEF ( ) is used. The value is an
estimate and varies depending on the conditions such as the content printed, paper size, paper type, and the
machine operating environment.
Important • When you replace a toner cartridge, toner may spill and soil the floor. We recommend laying
paper on the floor beforehand.
• The use of toner cartridges not recommended by Fuji Xerox may degrade image quality and
performance. Use only toner cartridges recommended by Fuji Xerox.
• When the remaining amount of toner is low, the machine may stop printing and display an
error code. If this occurs, replace the toner cartridge to resume copying or printing.
• Leave the machine's power ON when replacing the toner cartridge.
Follow the steps below to replace the toner cartridge.
1 Make sure that the machine is not operating,
and open the front cover.
2 Hold the handle of toner cartridge and lift it up
slightly.
3 Gently pull the toner cartridge out of the
machine.
Important • Pull out the toner cartridge slowly. Otherwise, toner may spill from the cartridge.
• Return used toner cartridges to your local Fuji Xerox representative.
Never throw a toner cartridge into an open flame. Remaining toner in the cartridge
may catch fire and cause burn injuries or explosion.
If you have a used toner cartridge no longer needed, contact your local Fuji Xerox
representative for its disposal.