Fuji Xerox DocuCentre S2010 User Manual

Copying Problems
161
Problem Solving
11
Striped patterns
appear in copies.
The document's
enlargement factor is too
large.
When making enlarged copies, some
enlargement factors can create striped
patterns. Adjust the copy enlargement
factor.
Refer to "Reduce/Enlarge" (P.91).
Copies are out of
position or
crooked.
You have not placed the
document correctly.
Place the document correctly.
Refer to "Placing the Document" (P.84).
The document feeder's
document guides are
misaligned.
Place the document correctly, moving the
document guides into contact with the
edges of the document.
You have not mounted the
tray securely.
Mount the tray by inserting it securely all
the way into the machine.
The paper guides of the
Bypass tray are misaligned.
Place the document correctly, moving the
document guides into contact with the
edges of the document.
The document size is not
correct.
Check the document size set correctly.
Refer to "Original Size" (P.92).
The paper size is not
correct.
Check the paper size set correctly.
Refer to "Setting the Paper Size" (P.80).
The copy is not
the desired size.
The document cover or
document glass is dirty.
Clean the document cover or document
glass.
Refer to "Cleaning Document Cover and
Document Glass" (P.144).
The document is a
transparency or highly
translucent medium.
Place a sheet of white paper over the
document before copying.
The document has shifted
out of position.
Place the document correctly.
Refer to "Placing the Document" (P.84).
The document feeder's
document guides are
misaligned.
Place the document correctly, moving the
document guides into contact with the
edges of the document.
Refer to "Placing the Document" (P.84).
The document is creased. Smooth out the document and place it
again correctly.
Refer to "Placing the Document" (P.84).
The document size setting
is incorrect.
Check the document size set correctly.
Refer to "Original Size" (P.92).
The paper size setting is
incorrect.
Check the paper size set correctly.
Refer to "Setting the Paper Size" (P.80).
The edges of
copies are cut
off.
The document exceeds the
printable area.
Adjust the reduction/enlargement factor to
reduce the copy slightly.
The document size is not
correct.
Check the document size set correctly.
Refer to "Original Size" (P.92).
The paper size is not
correct.
Check the paper size set correctly.
Refer to "Setting the Paper Size" (P.80).
Symptom Possible Cause Remedy

Fuji Xerox DocuCentre S2010 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre S2010
Category	Printer
Language	English