Fuji Xerox DocuCentre S2010 User Manual

11 Problem Solving
176
Problem Solving
11
Error code (XXX-XXX)
The drum cartridge is defective. Replace the drum cartridge
immediately. Otherwise, the
machine will be damaged.
Refer to "Replacing the Drum
Cartridge" (P.142).
Reached the maximum copy limit
while the limit is set. Also, the user
who reached the copy job limit has
logged in.
Press the <Stop> button, and
contact your system administrator.
A job is canceled due to out of
memory in reading.
Change the setting, and then try
again.
A job is canceled. Change the setting, and then try
again.
Error Code Cause Remedy
004-345
An error occurred. Switch off the machine power, make
sure that the display is blank, and
then switch on the machine power.
005-210
An error occurred. Switch off the machine power, make
sure that the display is blank, and
then switch on the machine power. If
the same error code is displayed
again, contact our Customer
Support Center.
005-275
An error occurred. Switch off the machine power, make
sure that the display is blank, and
then switch on the machine power.
005-280
An error occurred. Switch off the machine power, make
sure that the display is blank, and
then switch on the machine power. If
the same error code is displayed
again, contact our Customer
Support Center.
005-500
An error occurred. Switch off the machine power, make
sure that the display is blank, and
then switch on the machine power.
005-940
An error occurred in the document
feeder.
When finished copying, proceed one
of the followings: press any button
on the control panel, execute new
job, or wait until the machine
reaches the time out to releases the
error.
Error Code Cause Remedy

Fuji Xerox DocuCentre S2010 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre S2010
Category	Printer
Language	English