1 Before Using the Machine
14
Before Using the Machine
1
(ApeosPort-VI C7771/C6671, DocuCentre-VI C7771/C6671 only)
This product uses 2 power cords. Plug off all the power cords to completely
stop power supply to this product.
(ApeosPort-VI C7771/C6671, DocuCentre-VI C7771/C6671 only)
Power capacity of this product is 13A and 7A per power cord. Connect each
power cord to the differenct power supply whose breaker of a switchboard is
independent each other.
Do not connect power cords to outlets leading to the same breaker of a
switchboard. Otherwise, a breaker may trip.
Confirm power capacity of a breaker before you connect peripheral devices to
an outlet. Connect peripheral devices to another outlet than that for a main
product.
When cleaning this product, always switch off and unplug it. Access to a live
machine interior may cause electric shock.
Do not unplug or re-plug this product with the switch on. Plugging and
unplugging a live connector may deform the plug and generate heat, and
eventually cause a fire accident.
Hold the plug not the cord when unplugging this product, or it may damage
the cord and cause electric shock or a fire accident.
Switch off and unplug the product when it (i.e., fax function) is not used over
weekends or long holidays.
Please note that it cannot receive fax message during switch-off.
Once a month, switch off this product and check if
- the power cord is plugged firmly into an electrical outlet;
- the plug is not excessively heated, rusted or bent;
- the plug and electrical outlet are free of dust; and
- the power cord is not cracked or worn down.
Once you notice any unusual condition, switch off and unplug this product
first and contact Fuji Xerox Customer Support Center.
Outlet
Breaker
Machine’s power cables
Additional device’s power cable
To Next Page
Loading...
Need help?
General
