Fuji Xerox DocuCentre-VI C4471 Quick Reference

Power Saver Modes
57
Product Overview
2
Smart WelcomEyes
The machine provides human detection feature called Smart WelcomEyes. When Smart
WelcomEyes detects human presence within the range of approximately 35 cm from the
machine front, it operates as follows:
z
Deactivation of the Power Saver mode without pressing the <Power Saver> button
When the sensor detects human presence, the Power Saver mode is released and then
exited.
z
Prohibition of entering the Power Saver mode
While the sensor is detecting human presence, the machine does not enter the Power
Saver mode.
z
Deactivation of timer control
While the sensor is detecting human presence, timer-controlled operations, such as Auto
Clear and Auto Job Release, do not work.
When the sensor detects human presence, the indicator of Smart WelcomEyes is lit on.
Note • If you wear the cloth which reflects light such as a lame clothing and a sequin clothing, the feature
may not work properly.
• The detectable range of Smart WelcomEyes can be changed up to approximately 60 cm. For more
information, contact our Customer Support Center.
Changing the Interval for Entering Power Saver Mode
You can set the time to elapse until the machine enters the Low Power mode and the Sleep
mode from 1 to 240 minutes in 1 minute increments.
Note • If the preset time period is the same for the Low Power mode and the Sleep mode, the machine
directly enters the Sleep mode without entering the Low Power mode first.
• When the machine operates Print, Sample print, or Print fax while the control panel remains lit off
and the machine is in the Power Saver mode, only the output device exits the Power Server mode. In
this case, the machine enters the Sleep mode 15 seconds later without following this setting.
1 Press the <Log In/Out> button.
2 Enter the system administrator's user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
When a passcode is required, select [Next] and
enter the system administrator's passcode, and
select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3 Select [Tools] on the Services Home screen.
Note • When the Services Home screen is not
displayed on the touch screen, press the
<Services Home> button.

Fuji Xerox DocuCentre-VI C4471 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-VI C4471
Category	All in One Printer
Language	English