2 Product Overview
54
Product Overview
2
Switching the Power Off
The following describes how to switch the power off.
Important • If the power is switched off, all the services of the machine will stop. When using the machine
throughout the day for jobs such as receiving fax, do not switch the power off.
1
Before switching the power off, make sure that the machine has completed all copy or print
jobs. Then, make sure that the <Data> indicator is not blinking.
Important •Do not switch the power off in the following situations. If the power is switched off, the data being
processed may be erased.
- While data is being received
- While a job is being printed
- While a job is being copied
- While a job is being scanned
• When switching the power off, wait 5 seconds after outputs have been delivered.
2
Press the push-button power switch.
Important •Power off processing is performed internally
on the machine for a while after the power is
switched off. Therefore, do not switch the
main power off immediately after switching
the power off.
Note • When powering the machine on after it has
been switched off, wait until the flash of the
<Power Saver> button ends after the touch
screen has gone dark.
Switching the Main Power Off
The following describes how to switch the main power off.
Important •Do not switch the main power off when a screen is displayed on the touch screen or while the <Power
Saver> button is blinking. Switching off the main power under such circumstances may damage the
hard disk and the memory or cause a machine malfunction.
• Switch the main power off first when unplugging the power cord. Unplugging the power cord with
the main power on may damage the hard disk and the memory or cause a machine malfunction.
1
Make sure that the power is switched off.
2
Make sure that the touch screen is blank and the <Power Saver> button is not lit.
3
Open the front cover.
To Next Page
Loading...
Need help?
General
