5 Maintenance
92
Maintenance
5
Replacing the Toner Cartridge
The toner cartridge is a customer replaceable unit. The touch screen will display a message
that it is time to replace the cartridge when the remaining level of the toner cartridge
reaches low.
1
Make sure that the machine is not operating,
and open the front cover.
2
Pull out the toner cartridge indicated in the
message, and slide it out slowly.
Important • Slide out the toner cartridge gently. Otherwise, toner may spill from the cartridge.
• "Y", "M", "C", or "K" indicates Yellow, Magenta, Cyan, and Black, respectively.
3
Take the new toner cartridge of the same color
out of the box, and shake the cartridge up and
down and left and right for ten times.
Important • Do not touch the shutter part.
4
Hold the cartridge with the arrow facing up, and
push the cartridge in slowly until it stops.
Note • If the cartridge is not fully inserted, a message
appears and the machine will remain paused.
Never throw a toner carridge into an
open flame. Remaining toner in the
cartridge may catch fire and cause burn
injuries or explosion.
If you have a used toner cartridge no
longer needed, contact Fuji Xerox
Customer Support Center for its take-
back.
To Next Page
Loading...
Need help?
General
