Fuji Xerox DocuCentre-VI C4471 Quick Reference

6 Troubleshooting
120
Troubleshooting
6
When the Side Tray (optional) is installed
Remove paper from the Side Tray (1), close the
Side Tray (2), and then open the top left cover.
2 Move the lever A1 towards you to open the
chute of the fusing unit.
3 Remove the jammed paper.
Important • The fusing unit is extremely hot. Do not touch
the fusing unit as it may result in burn injury.
Note • If the paper is torn, make sure no piece of
paper remains inside the machine.
4 Return the lever A1 to the original position, and close the chute of the fusing unit.
5 Push the center of the top left cover and close the cover gently.
Paper Jams in Finisher B1
The following describes how to clear paper jams occurring in the Finisher B1 (optional).
Paper Jams under the Finisher Top Cover.............................................................................................................................. 120
Paper Jams in the Center Unit.................................................................................................................................................. 121
Paper Jams under the Finisher Top Cover
1 Push up the lever on the finisher top cover.

Fuji Xerox DocuCentre-VI C4471 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-VI C4471
Category	All in One Printer
Language	English