1 Before Using the Machine
18
Before Using the Machine
1
Do not incline the product at more than 10 degree angle. Otherwise, it may
fall over and cause injuries.
Always lock the wheels of this product after installation. Otherwise, it may
fall over or slide and cause injuries.
To bundle wires and cables, always use the cable ties and spiral tubes that
Fuji Xerox supplies. Otherwise, it may cause some defects.
To keep this product in a good performance and condition, always use it in
the following environment:
- Temperature: 10 - 32°C
- Humidity: 15 - 85%
When the product is left in a chilly room and the room is rapidly warmed up
by heater, dew condensation may form inside the product and cause a partial
deletion on printing.
80
2379
1748
25
2274 *
400
1248
100
With Duplex Automatic Document Feeder C1-PC, C3 Finisher with Booklet Maker
(optional), Folder Unit CD1 (optional), HCF B1 (optional), and Side Tray
(Unit: mm)
*: Clearing paper jams
Front
Back
Front
Back
Left
Right
Left
Right