Copying Procedure
63
Basic Operation
3
2
Load the document face up (when the
document is 2-sided, load the front side up) in
the center of the document feeder.
Note • The Confirmation indicator lights up when the
document is loaded correctly. If the indicator
does not light, load the document again.
3
Adjust the document guides to match the size of
the document loaded.
4
Raise the document stopper.
Document Glass
The document glass supports a single sheet, a book, or other similar documents with size
from 15 x 15 mm to 297 x 432 mm (Standard size: A3, 11 x 17").
Important • Always close the document cover after using the document glass.
The document glass automatically detects standard size documents. For non-standard size
documents, enter the size on the [Original Size] screen.
1
Open the document cover.
Important • Make sure that the touch screen is active, and
then load a document. Otherwise, the machine
may not properly detect the document size.
Do not apply excessive force to hold thick document on the document glass. It may
break the glass and cause injuries.
To Next Page
Loading...
Need help?
General
