5.2 Common Menus Setting 127
2 Sided Printing Sets whether to enable 2-sided printing.
• [Off] (default)
Disables 2-sided printing.
• [Long Edge Flip]
Prints on both sides of the paper so that the finished document opens like a
book.
• [Short Edge Flip]
Prints on both sides of the paper so that the finished document opens like a
calendar.
Note
• This item is displayed when the Duplex unit (option) is installed.
Print Mode Sets the print mode to one of the following:
• [High Speed]
Prints documents at a higher speed than [Normal].
• [Normal] (default)
Prints documents at standard speed with standard image quality.
•[High Quality]
Produces higher image quality than [Normal], but at a lower print speed.
Password Before printing a password-locked PDF, set the password here. The file will be
printed only if its password matches the password you set here.
The password can be up to 32 alphanumeric characters long.
(See No. 1, 3, 4, 5 of *4 on P. 188.)
Collated Sets whether to collate multiple-set documents. (1, 2, 3...1, 2, 3...)
• [Off] (default)
•[On]
Output Size Sets the output paper size.
• [Auto] (default)
Automatically determines the output size based on the size and settings of
your PDF file.
• [A4] or [8.5 x 11"]
Displays either [A4] or [8.5 x 11"] depending on the option selected under
[Admin Menu] > [Printer Settings] > [DefaultPaperSize].
Layout Sets the output layout.
• [Auto %] (default)
Automatically selects the output size and calculates the zoom ratio to print
the file as large as possible on the output paper.
• [100% (No Zoom)]
Prints your PDF file in its original size regardless of the output size.
• [Booklet]
Creates a booklet from a set of 2-sided documents. It correctly positions
each page to produce output, that when folded, will be ordered read like a
book. Depending on the page structure, [Booklet] cannot be used and [Auto
%] is used instead. When [Output Size] is [A4], the output size will be A4.
When [Output Size] is [Auto], the output size will be A3 or A4.
• [2 Pages Up]
Prints two pages onto one sheet of paper. When this is selected, the output
size will be A4 or 8.5 x 11” depending on the option selected under [Admin
Menu] > [Printer Settings] > [DefaultPaperSize].
• [4 Pages Up]
Prints four pages onto one sheet of paper. When this is selected, the output
size will be A4 or 8.5 x 11” depending on the option selected under [Admin
Menu] > [Printer Settings] > [DefaultPaperSize].
Note
• The Duplex unit (optional) is required for "Catalog (Booklet)". If the 2 Side
Printing function is not available, printing is done on 1 side.
Setting Description
To Next Page
Loading...
Need help?
General
