236 7 Maintenance
7 Maintenance
7.1 Replacing Consumables
Types of Consumables
This printer uses the consumables listed below. To order them, contact the dealer where
you purchased the printer.
Important
• This printer is designed to provide the most stable performance and print quality when used with
genuine consumables. If you use consumables with specifications different from those of the genuine
consumables, printer performance may not be at its optimum. If the printer breaks due to the use of non-
genuine consumables, you may incur the repair charges. Should the printer experience trouble while
using genuine consumables, you will be able to receive full support. Use of genuine consumables is
recommended in order to ensure peak performance of your printer.
• The page yield of each consumable varies depending on print requests, documents printed, and how
often the power is switched on/off. For more information, refer to “A.3 Life of Consumables and Regular
Replacement Parts” (P. 327).
WARNING
• Store all consumables in accordance with the instructions given on its package or
container.
• Never throw a print cartridge into an open flame. Remaining print in the cartridge may
catch fire and cause burn injuries or explosion.
If you have a used print cartridge no longer needed, contact your local Fuji Xerox
representative for its disposal.
• Use the specified battery. Replacing the battery with a battery other than the specified
one may cause explosion. Dispose of the used battery as directed.
Product Name Product Code
Page Yield
(Reference Value)
Print cartridge (15K) CT350936 Approx. 15,000 pages
Print cartridge (15K) (for China only) CT350937 Approx. 15,000 pages
100k Maintenance Kit 110V
*1*2
E3300187 Approx. 100,000 pages
100k Maintenance Kit 220V
*1*2
E3300188 Approx. 100,000 pages
200k Maintenance Kit
*2*3
E3300190 Approx. 200,000 pages
*1
: 100k Maintenance Kit: This is repacing kit for Bypass Feed Roller. A kit consisting of the Fuser Unit
and Bypass Feed Roller Unit (Bypass Feed Roller and Bypass Retard Roller).
*2
: 100k Maintenance Kit is available with two specifications G110V and 220V. Check printer
specification before ordering.
*3
: 200k Maintenance Kit: This is repacing kit for Tray Feed Roller. A kit consisting of the Tray Feed
Roller Unit (Nudger roller, Tray Feed Roller, and Tray Retard Roller) and Transfer Roll.
To Next Page
Loading...
Need help?
General
