Fuji Xerox DocuPrint 3105

6.8 Extending the life of the Print cartridge 235
6.8 Extending the life of the Print cartridge
Under the factory default setting for this printer, printing will not stop immediately even when
it becomes time to replace the print cartridge.
However, if the [PrintcartridgeLifeEnd] setting is changed to [Cancel Printing] in [System
Settings] under [Admin Menu], the printer will stop when it becomes time to replace the print
cartridge.
When the printer stops, even if you need to continue printing, you cannot display [Admin
Menu] from the menu screen. In this case, display [Consumables Menu] with the following
procedure, and set [PrintcartridgeLifeEnd] to [Continue to Print] and resume printing.
1. Press simultaneously the < > and <OK>
button on the control panel.
The Consumables Menu is displayed.
2. Press the < > or <OK> button to select.
The current setting is displayed.
3. Press the< > button to display [Continue
to Print].
4. Press the < > or <OK> button to set
[Continue to Print].
5. Press the <Printer Settings> button to
return to the print screen.
You will be able to continue printing some more.
Consumables Menu
Serial Number
Consumables Menu
PrintcartridgeLifeEnd
PrintcartridgeLifeEnd
Continue to Print
PrintcartridgeLifeEnd
・ Continue to Print