5.2 Common Menus Setting 165
[Ram Disk]
Note
• This item is displayed when additional system memory (1 GB) (optional) is installed, but no the HDD
Extension Kit (optional).
System Settings
Ram Disk
Setting Description
Ram Disk Sets whether or not to use the RAM disk. Setting this to [Enabled] allows you to
use the RAM disk.
• [Enabled] (default)
• [Disabled]
Note
• If you are using the RAM disk, all documents accumulated in the printer will
be deleted if you switch the printerÅfs power on and then on again.
To Next Page
Loading...
