EasyManuals Logo

Fuji Xerox DocuPrint 3105 User Manual

Fuji Xerox DocuPrint 3105
384 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #341 background imageLoading...
Page #341 background image
A.8 Installing the Parallel Port Kit (Optional) 341
A.8 Installing the Parallel Port Kit (Optional)
This section describes how to install the Parallel Port Kit (Optional) on the printer.
Note
The clamp that come with the option are not used with this printer.
Important
Parallel Port Kit (Optional) and Gigabit Ethernet Board Card (Optional) cannot be installed concurrently.
If the Gigabit Ethernet Board Card (Optional) is installed, remove the card by reference to “Removing the
Gigabit Ethernet Board Card” (P. 348).
When installing both the Parallel Port Kit (Optional) and Feature Enhance Kit, install the Feature
Enhance Kit first.
Installing the Parallel Port Kit (Optional)
1. Switch the power off by pressing the < >
side of the power switch of the printer.
After checking that the display of the control
panel and the various lamps have switched
off, unplug the power cord from the power
outlet and the printer.
Note
The electric parts on the inside of the right cover of the
printer can get very hot. Before installing extension
system memory, be sure to first switch off the power of
the printer, wait for approximately 40 minutes, and
check that the temperature inside the printer has
cooled down.
Parallel Port Kit (with frame) Connector conversion cable

Table of Contents

Other manuals for Fuji Xerox DocuPrint 3105

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuPrint 3105 and is the answer not in the manual?

Fuji Xerox DocuPrint 3105 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuPrint 3105
CategoryPrinter
LanguageEnglish

Related product manuals