130 5 Control Panel Settings
Setting Description
Quantity Sets the print quantity.
• [1 Set(s)] to [999 Set(s)] (default: [1 Set(s)])
Note
• Depending on the protocol used for file transmission, the value specified on
the protocol may override the [Quantity] setting.
2 Sided Printing Sets whether to enable 2-sided printing.
• [Off] (default)
Disables 2-sided printing.
• [Long Edge Flip]
Prints on both sides of the paper so that the finished document opens like a
book.
• [Short Edge Flip]
Prints on both sides of the paper so that the finished document opens like a
calendar.
Note
• The Duplex unit (optional) is required for "Catalog (Booklet)". If the 2 Side
Printing function is not available, printing is done on 1 side.
Print Mode Sets the print mode to one of the following:
• [High Speed]
Prints documents at a higher speed than [Normal].
• [Normal] (default)
Prints documents at standard speed with standard image quality.
•[High Quality]
Produces higher image quality than [Normal], but at a lower print speed.
Password Before printing a password-locked DocuWorks files, set the password here.
DocuWorks files will be printed only if its password matches the password you
set here.
The password can be up to 32 alphanumeric characters long.
(See No. 1, 3, 4, 5 of *4 on P. 188.)
Collated Sets whether to collate multiple-set documents. (1, 2, 3...1, 2, 3...)
• [Off] (default)
•[On]
Layout Sets the output layout.
• [Auto %] (default)
Automatically selects the output size and calculates the zoom ratio to print
the file as large as possible on the output paper.
• [100% (No Zoom)]
Prints your DocuWorks file in its original size regardless of the output size.
• [2 Pages Up]
Prints two pages onto one sheet of paper. When this is selected, the output
size will be A4 or 8.5 x 11” depending on the option selected under [Admin
Menu] > [Printer Settings] > [DefaultPaperSize].
• [4 Pages Up]
Prints four pages onto one sheet of paper. When this is selected, the output
size will be A4 or 8.5 x 11” depending on the option selected under [Admin
Menu] > [Printer Settings] > [DefaultPaperSize].
Note
• For [Auto %], [2 Pages Up] or [4 Pages Up], the zoom ratio will be calculated
based on the document size excluding sticky notes.