172 5 Control Panel Settings
Setting Description
Image Log Control Set whether or not to use the image log control feature. Normally, the
printer is used with this feature set to [Off]. Consult your dealer to use
the Image Log Control feature.
• [Off] (default)
•[On]
Generate ImageLog Sets whether or not to generate an image log.
•[Off]
• [On] (default)
Assurance Level Sets the level at which an image log is reliably generated for a print job.
• [High]
Image logs are generated unconditionally. For this reason, print
operations are sometimes affected.
• [Low] (default)
Image logs are generated as much as possible with priority given to
printer performance. For this reason, generation of image logs is
sometimes skipped.
Transfer
ImageLog
- Sets transfer of image logs to the log server.
Log
Transfer
Set whether or not to enable the image log transfer feature.
• [Disabled] (default)
•[Enabled]
Logs To
Transfer
Sets automatic transfer of image logs.
•[Pause]
• [Per Job Basis]
• [Accumulate First] (default)
Note
• [Per Job Basis] is displayed when [Image Log Control] > [Assurance
Level] is set to [High].
Transfer
Timing
Sets the timing that image logs are transferred. Set [Disabled] or
[Enabled] for each of the transfer timings. Default is all [Enabled].
• [At end of the job]
•[At power On]
• [End of selections]
• [When max reached]
Assurance
Level
Sets the assurance level when data is transferred to the log server.
• [Low] (default)
• [High]
Note
• When [High] is set, data is transferred unconditionally. However,
during data transfer, printer performance might drop or printing may
be paused.
To Next Page
Loading...
Need help?
General
